EdgeOS » Historique » Version 1
Version 1/31
-
Suivant » -
Version actuelle
Laurent GUERBY, 23/10/2016 18:47
EdgeOS¶
Commandes¶
show interfaces status all Port Name State Mode Status Type Status --------- ---------------------------- ------ ---------- ---------- ------------------ ------------ 0/1 Down Auto Unknown Inactive 0/2 Down Auto Unknown Inactive 0/3 Up Auto 100 Full Unknown Active ... (UBNT EdgeSwitch) #show interfaces switchport Port: 0/1 VLAN Membership Mode: General Access Mode VLAN: 1 (default) General Mode PVID: 3131 General Mode Ingress Filtering: Disabled General Mode Acceptable Frame Type: Admit all General Mode Dynamically Added VLANs: General Mode Untagged VLANs: 3131 General Mode Tagged VLANs: 3199 General Mode Forbidden VLANs: 1,20,128,376,3132,3166,3175 Trunking Mode Native VLAN: 1 (default) Trunking Mode Native VLAN tagging: Disable Trunking Mode VLANs Enabled: All Protected Port: False Port: 0/2 ...
(UBNT EdgeSwitch) #show fiber-ports optics-info all Link Link Nominal Length Length Bit 50um 62.5um Rate Port Vendor Name [m] [m] Serial Number Part Number [Mbps] Rev Compliance -------- ---------------- --- ---- ---------------- ---------------- ----- ---- ---------------- 0/49 OEM 0 0 SG35E40803862 SFP+10GSMD3120LC 10300 A 10GBase-LR 0/50 OPTIC 0 0 STC03051500015 OPTICSFP+10GCP3M 10300 A0 DAC (UBNT EdgeSwitch) #show fiber-ports optics all Output Input Port Temp Voltage Current Power Power TX LOS [C] [Volt] [mA] [dBm] [dBm] Fault -------- ---- ------- ------- ------- ------- ----- --- 0/49 45.2 3.332 31.5 -3.079 -3.223 No No 0/50 N/A N/A N/A N/A N/A N/A N/A Temp - Internally measured transceiver temperatures. Voltage - Internally measured supply voltage. Current - Measured TX bias current. Output Power - Measured optical output power relative to 1mW. Input Power - Measured optical power received relative to 1mW. TX Fault - Transmitter fault. LOS - Loss of signal. </pre