Projet

Général

Profil

FTOS

Dell/Force10 S4810 48 ports 10G SFP+ + 4 ports 40G

supporte cumulus http://cumulusnetworks.com/static/cumulus/pdf/Cumulus_Networks_Dell_Datasheet.pdf
http://cumulusnetworks.com/

https://www.force10networks.com/CSPortal20/KnowledgeBase/DOCUMENTATION/CLIConfig/FTOS/S4810_CONFIG_8.3.12.0_29-Aug-2012.pdf
https://www.force10networks.com/CSPortal20/KnowledgeBase/DOCUMENTATION/CLIConfig/FTOS/S4810_CLI_8.3.12.0_28-Aug-2012.pdf
https://www.force10networks.com/CSPortal20/KnowledgeBase/DOCUMENTATION/CLIConfig/FTOS/S4810_9.5(0.0)_Config.pdf
https://www.force10networks.com/CSPortal20/KnowledgeBase/DOCUMENTATION/CLIConfig/FTOS/S6000_9.5(0.0)_CLI.pdf

https://www.dell.com/support/article/fr/fr/frbsdt1/how10657/how-to-manage-the-qsfp-ports-on-a-force10-s4810-switch?lang=en

Commandes

Version

s4810a#show version
Dell Force10 Real Time Operating System Software
Dell Force10 Operating System Version: 1.0
Dell Force10 Application Software Version: 8.3.12.1
Copyright (c) 1999-2012 by Dell Inc. All Rights Reserved.
Build Time: Sun Nov 18 11:05:15 2012
Build Path: /sites/sjc/work/build/buildSpaces/build20/E8-3-12/SW/SRC/Cp_src/Tacacs
s4810a uptime is 2 year(s), 5 week(s), 6 day(s), 0 hour(s), 54 minute(s)

System image file is "system://A" 

System Type: S4810 
Control Processor: Freescale QorIQ P2020 with 2147483648 bytes of memory.

128M bytes of boot flash memory.

  1 52-port GE/TE/FG (SE)
 48 Ten GigabitEthernet/IEEE 802.3 interface(s)
  4 Forty GigabitEthernet/IEEE 802.3 interface(s)

s4810b>show version
Dell Real Time Operating System Software
Dell Operating System Version:  2.0
Dell Application Software Version:  9.5(0.0P2)
Copyright (c) 1999-2014 by Dell Inc. All Rights Reserved.
Build Time: Thu Jul  3 15:45:57 2014
Build Path: /sites/eqx/work/swbuild01_1/build04/E9-5-0/SW/SRC
Dell Networking OS uptime is 3 day(s), 18 hour(s), 41 minute(s)

System image file is "system://A" 

System Type: S4810 
Control Processor: Freescale QorIQ P2020 with 2 Gbytes (2147483648 bytes) of memory, cores(s) 1.

128M bytes of boot flash memory.

  1 52-port GE/TE/FG (SE)
 48 Ten GigabitEthernet/IEEE 802.3 interface(s)
  4 Forty GigabitEthernet/IEEE 802.3 interface(s)

Screen

screen -m -c /dev/null /dev/ttyUSB0 9600 8n1

SSH

s4810a#show crypto key mypubkey rsa

#conf t
#ip ssh rsa-authentication enable 

Setup

dir 
delete flash://startup-config 
reload 
no 
yes

en exec 
stop jumpstart
wr 

username force10 password force10 
enable password force10 
wr
portmod hybrid 
switchport
int vl 2
unttagged t0/23
int vl 3
tagged t0/23

show vlan 

stack-unit 1 renumber 0 
no 
yes

ip ssh server enable

NTP

NTP client de nagios

conf t
ntp server 192.168.3.7
ntp source Vlan 3175

Misc

show inventory media 
show mac-address-table dynamic
show mac-address-table dynamic vlan 3132
show mac-address-table dyn int te0/0
Force10# sh int swi te0/0

Codes:  U - Untagged, T - Tagged
        x - Dot1x untagged, X - Dot1x tagged
        G - GVRP tagged, M - Trunk, H - VSN tagged
        i - Internal untagged, I - Internal tagged, v - VLT untagged, V - VLT tagged

Name: TenGigabitEthernet 0/0
802.1QTagged: Hybrid
Vlan membership:
Q       Vlans
U       1
T       3133-3135,3175

Native VlanId:    1.
show interface tengigabitethernet 0/47 transceiver
...
SFP+ 47 Temperature                      = 41.902C
SFP+ 47 Voltage                          = 3.287V
SFP+ 47 Tx Bias Current                  = 34.012mA
SFP+ 47 Tx Power                         = 0.519mW
SFP+ 47 Rx Power                         = 0.451mW
FTOS#sh int status
Port     Description  Status Speed     Duplex Vlan  
Te 0/0                Down   Auto      Auto   1,3131,3175,3199
Te 0/1                Up     10000 Mbit Full   1,20,128,666,3118,3131,3175,3199
Te 0/2                Up     10000 Mbit Full   3188
Te 0/3                Down   Auto      Auto   3188
Te 0/4                Up     10000 Mbit Full   3188
Te 0/5                Up     10000 Mbit Full   3188
Te 0/6                Down   Auto      Auto   3188
Te 0/7                Up     10000 Mbit Full   3188
Te 0/8                Up     10000 Mbit Full   3188
Te 0/9                Up     10000 Mbit Full   3188
Te 0/10               Down   Auto      Auto   3188
Te 0/11               Down   Auto      Auto   3188
Te 0/12               Up     10000 Mbit Full   1,3131-3132,3175,3199
Te 0/13               Up     10000 Mbit Full   1,3131-3132,3175,3199
Te 0/14               Up     10000 Mbit Full   1,3131-3132,3175,3199
Te 0/15               Up     10000 Mbit Full   1,3131-3132,3175,3199
Te 0/16               Down   Auto      Auto   1,3131-3132,3175,3199
Te 0/17               Up     10000 Mbit Full   1,3131-3132,3175,3199
Te 0/18               Up     10000 Mbit Full   1,3131-3132,3175,3199
Te 0/19               Down   Auto      Auto   1,3131-3132,3175,3199
Te 0/20               Up     10000 Mbit Full   1,3131-3132,3175,3199
Te 0/21               Up     10000 Mbit Full   1,3131-3132,3175,3199
...
FTOS#sh interfaces switchport tengigabitethernet 0

Codes:  U - Untagged, T - Tagged
        x - Dot1x untagged, X - Dot1x tagged
        G - GVRP tagged, M - Trunk, H - VSN tagged
        i - Internal untagged, I - Internal tagged, v - VLT untagged, V - VLT tagged

Name: TenGigabitEthernet 0/0
802.1QTagged: Hybrid
Vlan membership:
Q       Vlans
U       1
T       3131,3175,3199

Native VlanId:    1.

Name: TenGigabitEthernet 0/1
802.1QTagged: Hybrid
Vlan membership:
Q       Vlans
U       1
T       20,128,666,3118,3131,3175,3199

Native VlanId:    1.

Name: TenGigabitEthernet 0/2
802.1QTagged: Hybrid
Vlan membership:
Q       Vlans
U       3188

Native VlanId:    3188.
...
FTOS#sh interfaces tengigabitethernet 0           
TenGigabitEthernet 0/0 is up, line protocol is down
Hardware is DellForce10Eth, address is 00:01:e8:8b:4f:cf
    Current address is 00:01:e8:8b:4f:cf
Pluggable media not present
Interface index is 33883138
Internet address is not set
MTU 1554 bytes, IP MTU 1500 bytes
LineSpeed auto
Flowcontrol rx on tx off
ARP type: ARPA, ARP Timeout 04:00:00
Last clearing of "show interface" counters 80w0d1h
Queueing strategy: fifo
Input Statistics:
     0 packets, 0 bytes
     0 64-byte pkts, 0 over 64-byte pkts, 0 over 127-byte pkts
     0 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-byte pkts
     0 Multicasts, 0 Broadcasts
     0 runts, 0 giants, 0 throttles
     0 CRC, 0 overrun, 0 discarded
Output Statistics:
     0 packets, 0 bytes, 0 underruns
     0 64-byte pkts, 0 over 64-byte pkts, 0 over 127-byte pkts
     0 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-byte pkts
     0 Multicasts, 0 Broadcasts, 0 Unicasts
     0 throttles, 0 discarded, 0 collisions, 0 wreddrops
Rate info (interval 299 seconds):
     Input 00.00 Mbits/sec,          0 packets/sec, 0.00% of line-rate
     Output 00.00 Mbits/sec,          0 packets/sec, 0.00% of line-rate
Time since last interface status change: 80w0d1h

TenGigabitEthernet 0/1 is up, line protocol is up
Hardware is DellForce10Eth, address is 00:01:e8:8b:4f:cf
    Current address is 00:01:e8:8b:4f:cf
Pluggable media present, SFP+ type is 10GBASE-CU5M
    Medium is Twinax Copper
Interface index is 34145282
Internet address is not set
MTU 1554 bytes, IP MTU 1500 bytes
LineSpeed 10000 Mbit
Flowcontrol rx on tx off
ARP type: ARPA, ARP Timeout 04:00:00
Last clearing of "show interface" counters 80w0d1h
Queueing strategy: fifo
Input Statistics:
     77846344701 packets, 33998273797981 bytes
     4710063270 64-byte pkts, 40824319413 over 64-byte pkts, 9871182555 over 127-byte pkts
     3982474520 over 255-byte pkts, 684219485 over 511-byte pkts, 17774085458 over 1023-byte pkts
     64436920 Multicasts, 108058987 Broadcasts
     0 runts, 0 giants, 0 throttles
     0 CRC, 0 overrun, 0 discarded
Output Statistics:
     100565862739 packets, 85221880135780 bytes, 0 underruns
     5520274128 64-byte pkts, 32394947465 over 64-byte pkts, 5238057644 over 127-byte pkts
     2670375206 over 255-byte pkts, 2001008247 over 511-byte pkts, 52741200049 over 1023-byte pkts
     300101222 Multicasts, 601777166 Broadcasts, 99663984351 Unicasts
     0 throttles, 0 discarded, 0 collisions, 0 wreddrops
Rate info (interval 299 seconds):
     Input 00.00 Mbits/sec,        217 packets/sec, 0.00% of line-rate
     Output 00.00 Mbits/sec,        237 packets/sec, 0.01% of line-rate
Time since last interface status change: 1w5d1h
...

Switch Openstack

On se logue

enable password force10 
conf

Preparation des ports

int range tengigabitethernet 0/0 - 47
no switchport
portmod hybrid 
switchport
no shut

int range fortyGigE 0/48 - 60
no switchport
portmod hybrid 
switchport
no shut

# Pour le port uplink
int range tengigabitethernet 0/1
speed 1000

Pour un seul port :

enable
conf
int t0/10
speed 1000
exit
exit
wr
# ou do wr

Au cas ou "no negotiation auto" peut aider (cas des SFP bidi alturna CISCO) :


FTOS(conf-if-te-0/16)#negotiation ?
auto                    Perform link autonegotiation            
FTOS(conf-if-te-0/16)#speed ?     
10                      10 Mbps                                 
100                     100 Mbps                                
1000                    1000 Mbps                               
10000                   10000 Mbps                              
auto                    Auto negotiation (default)   

Creation des vlans

int vlan 3131
no shut

int vlan 3175
ip address 192.168.3.48/24
no shut

int vlan 3195
no shut

int vlan 174
no shut

Ajout des ports au vlan

int vlan 3131
tagged tengigabitethernet 0/1
tagged tengigabitethernet 0/5
tagged tengigabitethernet 0/7
tagged tengigabitethernet 0/9

int vlan 3132
tagged tengigabitethernet 0/1
tagged tengigabitethernet 0/5
tagged tengigabitethernet 0/7
tagged tengigabitethernet 0/9

int vlan 3175
tagged tengigabitethernet 0/1
tagged tengigabitethernet 0/5
tagged tengigabitethernet 0/7
tagged tengigabitethernet 0/9

int vlan 3199
tagged tengigabitethernet 0/1
tagged tengigabitethernet 0/5
tagged tengigabitethernet 0/7
tagged tengigabitethernet 0/9

Pour le TouIX untagged 4031

FTOS>enable
FTOS#conf
FTOS(conf)#int vlan 4031
FTOS(conf-if-vl-4031)#no shut
FTOS(conf-if-vl-4031)#description TouIX
FTOS(conf-if-vl-4031)#untagged tengigabitethernet 0/35
FTOS(conf-if-vl-4031)#exit
FTOS(conf)#wr

Detruire un vlan

no int vlan2

Enlever un port d'un vlan


int vlan 2
no tagged tengigabitethernet 0/1

Configuration routage

ip route 0.0.0.0/0 192.168.3.47

Configuration du logging

logging 91.224.149.152

Fabrication port bonding

- enable
- conf
- int tengigabitethernet 0/46
- port-channel-protocol lacp
- port-channel 10 mode active
- no shut

- int tengigabitethernet 0/47
- port-channel-protocol lacp
- port-channel 10 mode active
- no shut
- exit

- int port-channel 10
- sw
- no shut
- end
- wr

tcpdump

FTOS#tcpdump cp packet-count 10
% Copy operation not allowed until the TCP dump completes %
FTOS#dir flash:/TCP_DUMP_DIR/Tcpdump_141014021344/ 

40G

40G to 4x10G : reboot necessaire

http://www.dell.com/support/article/us/en/19/how10657/how-to-manage-the-qsfp-ports-on-a-force10-s4810-switch?lang=en