Projet

Général

Profil

Onduleur » Historique » Version 4

« Précédent - Version 4/9 (diff) - Suivant » - Version actuelle
Adrien van den Bossche, 22/06/2012 14:32


Onduleur

PowerWalker VI 650 LCD

http://www.powerwalker.com/line-interactive.asp?VA_level=650
Modèle 650 VA 360W 12V 7Ah 4.3 kg
Modèle 850 VA 480W 12V 9Ah 5kg aussi disponible

- USB data
- 2 prises schuko et filtre RJ11

Entre 50 et 60 euros

Supporté sous debian squeeze par défaut :

apt-get install nut
# edit /etc/nut/upsd.users to add
[admin]
    password = mypass
    actions = SET
    instcmds = ALL
# edit /etc/nut/nut.conf to add
MODE=standalone
# edit /etc/nut/ups.conf to add
[pw]
        driver = blazer_usb
    port = /dev/hidraw0
    vendorid = 0665
    productid = 5161
# Then
/etc/init.d/nut restart

Commandes :

# upsc -l
pw
# upsc pw
battery.voltage: 13.50
battery.voltage.nominal: 12.0
beeper.status: enabled
device.type: ups
driver.name: blazer_usb
driver.parameter.pollinterval: 2
driver.parameter.port: /dev/hidraw0
driver.parameter.productid: 5161
driver.parameter.vendorid: 0665
driver.version: 2.4.3
driver.version.internal: 0.03
input.current.nominal: 2.0
input.frequency: 50.0
input.frequency.nominal: 50
input.voltage: 231.5
input.voltage.fault: 231.5
input.voltage.nominal: 230
output.voltage: 231.5
ups.delay.shutdown: 30
ups.delay.start: 180
ups.load: 2
ups.productid: 5161
ups.status: OL
ups.type: offline / line interactive
ups.vendorid: 0665
# upscmd -u admin -p mypass -l  pw 
Instant commands supported on UPS [pw]:

beeper.toggle - Toggle the UPS beeper
load.off - Turn off the load immediately
load.on - Turn on the load immediately
shutdown.return - Turn off the load and return when power is back
shutdown.stayoff - Turn off the load and remain off
shutdown.stop - Stop a shutdown in progress
test.battery.start - Start a battery test
test.battery.start.deep - Start a deep battery test
test.battery.start.quick - Start a quick battery test
test.battery.stop - Stop the battery test
# upscmd -u admin -p mypass  pw beeper.toggle
# upscmd -u admin -p mypass pw shutdown.return
# upscmd -u admin -p mypass  pw load.off
# upscmd -u admin -p mypass  pw load.on
# upscmd -u admin -p mypass  pw test.battery.start.quick

La commande shutdown.return coupe la charge pendant 3 minutes environ et donc permet un reboot a distance des equipements sur l'onduleur.

Quand l'electricité n'est plus disponible ups.status pas a "OB" et battery.voltage decroit par palier de 0.1V. ups.load donne la charge approximative en %.

L'onduleur revient bien en ligne si on épuise les batteries mais qu'on remet le courant.

Tiens plus d'une heure sur une charge de 20 Watt.

DC-DC

Avec controle USB via obinou : http://www.mini-box.com/DCDC-USB
http://www.cartft.com/catalog/il/1114
https://www.aerial.net/shop/product_info.php?products_id=1199
http://www.mini-box.com/picoUPS-100-12V-DC-micro-UPS-system-battery-backup-system

Autre

TODO