Projet

Général

Profil

Relais Autonome » Historique » Version 25

Laurent GUERBY, 30/11/2011 15:28

1 1 Olivier FONTES
h1. Relais Autonome
2 1 Olivier FONTES
3 1 Olivier FONTES
Essais
4 1 Olivier FONTES
* [[Test du kit Photovoltaique Ekko 12W pour alimenter un WRT autonome]]
5 2 Julien Aubé
6 14 Laurent GUERBY
Liens
7 14 Laurent GUERBY
* http://www.lilegal.org/
8 14 Laurent GUERBY
experimentation post industriel a qqs km de Toulouse, eoliennes auto construites, lilian dot chardon at orange.fr 06 14 16 79 23
9 14 Laurent GUERBY
10 21 Laurent GUERBY
Mats
11 22 Laurent GUERBY
* CTA : http://www.cta-pylones.com/
12 21 Laurent GUERBY
* Leclerc : http://www.antennes-leclerc.fr/
13 23 Laurent GUERBY
* mat alu telescopique http://www.batima-electronic.com/spip.php?article160
14 23 Laurent GUERBY
* eolien http://www.ase-energy.com/mat-haubane-universel-7m-pour-eolienne,fr,4,MAT7M.cfm
15 23 Laurent GUERBY
* eolien http://www.aurore-energies.com/eolienne/mat_universel_de_6_metres_a_4_haubans/mat_6m_pour_petite_eolienne_mat_haubane.html
16 14 Laurent GUERBY
17 13 Laurent GUERBY
Panneaux solaires
18 8 Laurent GUERBY
* http://www.motto-engineering.eu/en/products/solar/schott-solar/
19 7 Laurent GUERBY
* http://www.mercateo.com/q?query=solarmarkt&catcat=live~showGrossColumn*
20 6 Laurent GUERBY
* http://www.ebay.de/itm/Schott-Solar-ASI-103-Photovoltaik-Solar-Solarmodul-/220871992555?pt=Solaranlagen&hash=item336cff24eb#ht_1312wt_1141
21 2 Julien Aubé
* http://www.simple-et-solaire.com/panneau-solaire/panneau-solaire-12v/panneau-solaire-amorphe-95wc.html
22 1 Olivier FONTES
* http://www.birdenergy.fr/shop/catalog/index.php?cPath=26 (Régulateurs multi-entrée Solaire/Eolien/hydro)
23 1 Olivier FONTES
* http://www.energiemobile.com/modulosite2/catalogue-produits.htm
24 13 Laurent GUERBY
25 19 Laurent GUERBY
Photovoltaique amorphe
26 19 Laurent GUERBY
* http://www.terra-eco.com/-Panneaux-solaires-photovoltaiques-
27 19 Laurent GUERBY
* http://www.equipsolar.fr/equipsolar.php?rb=2&pg=0
28 19 Laurent GUERBY
* http://ecatalog.tritec.info/index.php/language/fr/cat/c135_Schott-Solar-ASI-Thin-Film.html
29 19 Laurent GUERBY
* http://www.globosolar.fr/materiel-photovoltaique/panneaux-photovoltaiques/schott-solar.html
30 19 Laurent GUERBY
* http://www.tritec-energy.com/en/solar-modules/schott-asi-series-the-next-generation-c-135/
31 19 Laurent GUERBY
* http://www.surtec.fr/catalog/panneau-solaire-amorphe-cPath84.html
32 19 Laurent GUERBY
* http://www.elysun.fr/module-photovoltaique-amorphe-schott-asi-100w.html
33 19 Laurent GUERBY
* http://pvinsights.com/
34 19 Laurent GUERBY
* http://www.sunelec.com/suntech-solar-panel-220-watts-3420-vmp-p-1363.html
35 19 Laurent GUERBY
36 13 Laurent GUERBY
Batteries
37 13 Laurent GUERBY
* http://www.energiedouce.com/batterie-au-gel-a-decharge-profonde-12v-110ah-victron-energy.html
38 13 Laurent GUERBY
* http://www.installer-panneau-materiel-solaire.com/batteries/?mod=ecommerce&prid=&rid=4&type=pro&marque=&prix=&autre=&page=0
39 5 Laurent GUERBY
* http://www.maurelma.ch/shop/index.php?cat=WG101&product=740089
40 20 Laurent GUERBY
* http://shop.ebay.fr/mtk-handel/m.html?_nkw=&_armrs=1&_from=&_ipg=&_trksid=p3686
41 3 Laurent GUERBY
42 24 Laurent GUERBY
Piles a combustible
43 24 Laurent GUERBY
44 24 Laurent GUERBY
Piles au methanol pour les caravanes avec un modele en vente (ebay & boutiques meme sur Toulouse) autour de 2000 euros pour 25W (12V * 2A) de capacité, petite boite  43,5 x 20,0 x 27,6 cm / 6.5 kg et 0.9 litre de methanol par kWh produit. A 10W cela fait 45 jours d'autonomie pour 40 euros la recharge de 10 litres.
45 24 Laurent GUERBY
46 24 Laurent GUERBY
* http://energieplanete.secondes.info/prix-des-piles-a-combustible-efoy/
47 24 Laurent GUERBY
* http://www.efoy.com/fr/piles-a-combustible-produits.html
48 24 Laurent GUERBY
* http://www.le-camping-car.com/forum/electricite-energie-autonomie-f71/pile-combustible-efoy-t50.html
49 24 Laurent GUERBY
* http://www.ebay.de/sch/i.html?_from=R40&_trksid=p5197.m570.l1313&_nkw=efoy&_sacat=See-All-Categories
50 25 Laurent GUERBY
* http://www.efoy-comfort.com/fr/donn%C3%A9es-techniques-0
51 24 Laurent GUERBY
52 24 Laurent GUERBY
53 11 Laurent GUERBY
Eolien
54 11 Laurent GUERBY
* http://www.aerial.net/shop/index.php?cPath=104
55 11 Laurent GUERBY
* http://www.aerial.net/shop/product/1101/macrowind-400w-12v-6-blades.html
56 12 Laurent GUERBY
* Test de petites eoliennes http://www.bettergeneration.com/green-energy-reviews.html
57 17 Laurent GUERBY
* En haute garonne installateur vendeur : http://www.krugwind.com/
58 17 Laurent GUERBY
* Test SEPEN http://www.sepen-montplaisir.fr/
59 17 Laurent GUERBY
* http://fr.wikipedia.org/wiki/Petit_%C3%A9olien
60 11 Laurent GUERBY
61 3 Laurent GUERBY
Forums
62 3 Laurent GUERBY
* http://forum-photovoltaique.fr/viewtopic.php?f=40&t=22015
63 9 Laurent GUERBY
64 9 Laurent GUERBY
Doc
65 9 Laurent GUERBY
* http://www.posharp.com/photovoltaic/panelefficiency/database.aspx
66 9 Laurent GUERBY
67 18 Laurent GUERBY
Solutions radio
68 18 Laurent GUERBY
* http://jeelabs.com/products/jeenode
69 9 Laurent GUERBY
70 9 Laurent GUERBY
> Cell Type: The type of silicon that comprises a specific cell, based on the cell manufacturing process. Each cell type has pros and cons. Monocrystalline PV cells are the most expensive and energy intensive to produce but usually yield the highest efficiencies. Though polycrystalline and ribbon silicon cells are slightly less energy intensive and less expensive to produce, these cells are slightly less efficient than monocrystalline cells. However, because both poly- and ribbon silicon panels leave fewer gaps on the panel surface (due to square or rectangular cell shapes), these panels can often offer about the same power density as monocrystalline modules. Thin-film panels, such as those made from amorphous silicon cells, are the least expensive to produce and require the least amount of energy and raw materials, but are the least efficient of the cell types. They require about twice as much space to produce the same power as mono-, poly-, or ribbon-silicon panels. Thin-film panels do have better shade tolerance and high-temperature performance but are often more expensive to install because of their lower power density.
71 9 Laurent GUERBY
> Sanyo’s "bifacial" HIT panels are composed of a monocrystalline cell and a thin layer of amorphous silicon material. In addition to generating power from the direct rays of the sun on the panel face, this hybrid panel can produce power from reflected light on its underside, increasing overall panel efficiency.
72 9 Laurent GUERBY
> Cells in Series: Number of individual PV cells wired in series, which determines the panel design voltage. Crystalline PV cells operate at about 0.5V. When cells are wired in series, the voltage of each cell is additive. For example, a panel that has 36 cells in series has a maximum power voltage (Vmp) of about 18V. Why 36? Historically, panels known as 12V were designed to push power into 12V batteries. But to deliver the 12V, they needed to have enough excess voltage (electrical pressure) to compensate for the voltage loss due to high temperature conditions. Panels with 36 ("12V") or 72 ("24V") cells are designed for battery-charging applications. 
73 1 Olivier FONTES
> Panels with other numbers of cells in series are intended for use in grid-tied systems. Due to the increased availability of step-down/MPPT battery charge controllers, grid-tied panel
74 10 Laurent GUERBY
75 10 Laurent GUERBY
* http://www.freeenergyeurope.com/htm/FEE_solar_panel_test_results.htm
76 15 Laurent GUERBY
77 15 Laurent GUERBY
Projet
78 15 Laurent GUERBY
79 15 Laurent GUERBY
80 15 Laurent GUERBY
http://blog.lekermeur.net/?page_id=287
81 15 Laurent GUERBY
82 15 Laurent GUERBY
RB433, 2 minipci R52 ~ 15V 250 mA = 3.75W
83 15 Laurent GUERBY
84 15 Laurent GUERBY
Ca fait 90 Wh par jour soit 15 euros et 2.7 kg par jour
85 15 Laurent GUERBY
d'autonomie sur une batterie plomb, il faut encore multiplier
86 15 Laurent GUERBY
par 2 ou 3 pour eviter de decharger trop.
87 15 Laurent GUERBY
88 15 Laurent GUERBY
Le test par Olivier :
89 15 Laurent GUERBY
90 15 Laurent GUERBY
http://chiliproject.tetaneutral.net/projects/tetaneutral/wiki/Relais_Autonome
91 15 Laurent GUERBY
http://chiliproject.tetaneutral.net/projects/tetaneutral/wiki/Test_du_kit_Photovoltaique_Ekko_12W_pour_alimenter_un_WRT_autonome
92 15 Laurent GUERBY
93 15 Laurent GUERBY
Il faudra sans doute 50 a 100W de panneau photovoltaique pour un relai,
94 15 Laurent GUERBY
on trouve du 90W amorphe pour 121 euros livrés :
95 15 Laurent GUERBY
96 15 Laurent GUERBY
http://www.ebay.de/itm/Schott-Solar-ASI-90-Dunnschicht-Solarmodul-/250927063886?pt=Solaranlagen&hash=item3a6c6b234e#ht_500wt_1413
97 15 Laurent GUERBY
98 15 Laurent GUERBY
20kg de batterie (100 euros) + panneau (121 euros) + regulateur (50 ?)
99 15 Laurent GUERBY
+ matos wifi et antennes (300 ?) ~ 600 euros.
100 15 Laurent GUERBY
101 15 Laurent GUERBY
http://www.interprojekt.com.pl/mikrotik-routerboard-level-64mb-3xlan-3xminipci-p-394.html
102 15 Laurent GUERBY
http://www.interprojekt.com.pl/mikrotik-routerboard-r52nm-minipci-p-898.html
103 15 Laurent GUERBY
http://www.interprojekt.com.pl/mikrotik-routerboard-r52hn-300mbps-80211abgn-high-p-745.html
104 15 Laurent GUERBY
MIMO et dual 2.4/5.5
105 16 Laurent GUERBY
106 16 Laurent GUERBY
* Projet
107 16 Laurent GUERBY
108 16 Laurent GUERBY
Une solution alternative :
109 16 Laurent GUERBY
110 16 Laurent GUERBY
- un routerboard a la place du switch
111 16 Laurent GUERBY
- un cable pieuvre power jack 1 femelle vers 8 males
112 16 Laurent GUERBY
- une alimentation de portable 19V 3.42A
113 16 Laurent GUERBY
- un splitter PoE passif
114 16 Laurent GUERBY
- des injecteurs PoE passif
115 16 Laurent GUERBY
116 16 Laurent GUERBY
http://shop.varia-store.com/product_info.php?info=p1052_MikroTik-RouterBOARD-750--RB750--RB-750--Level-4-300-MHz.html
117 16 Laurent GUERBY
http://cgi.ebay.com/DC-1-8-Power-Cable-CCTV-Camera-DVR-Save-Adapter-/320442726434?pt=LH_DefaultDomain_0&hash=item4a9bdff822
118 16 Laurent GUERBY
http://cgi.ebay.com/PoE-Power-Over-Ethernet-Injector-Splitter-Adpater-Kit-/120719762126?pt=LH_DefaultDomain_0&hash=item1c1b7562ce
119 16 Laurent GUERBY
http://cgi.ebay.com/Acer-Notebook-AC-Adapter-Charger-19V-3-42A-5-5mm-2-1mm-/270686346419?pt=Laptop_Adapters_Chargers&hash=item3f0629dcb3
120 16 Laurent GUERBY
121 16 Laurent GUERBY
L'avantage du routerboard est qu'il accepte 9 a 28V DC en alimentation
122 16 Laurent GUERBY
donc a peu pres comme les ubiquity et que ses temperatures de
123 16 Laurent GUERBY
fonctionnement sont tres larges de -40 a +55C.
124 16 Laurent GUERBY
125 16 Laurent GUERBY
La doc du routerboard n'est pas tres claire sur la taille du power jack
126 16 Laurent GUERBY
est-ce 5.5/2.0 ou le plus standard 5.5/2.1 ?