Projet

Général

Profil

Relais Autonome » Historique » Version 36

Laurent GUERBY, 02/06/2012 10:42

1 34 Laurent GUERBY
{{>toc}}
2 34 Laurent GUERBY
3 1 Olivier FONTES
h1. Relais Autonome
4 1 Olivier FONTES
5 30 Laurent GUERBY
Issue #60
6 30 Laurent GUERBY
7 1 Olivier FONTES
Essais
8 1 Olivier FONTES
* [[Test du kit Photovoltaique Ekko 12W pour alimenter un WRT autonome]]
9 2 Julien Aubé
10 14 Laurent GUERBY
Liens
11 14 Laurent GUERBY
* http://www.lilegal.org/
12 32 Julien Aubé
expérimentation post-industriel a qqs km de Toulouse, éoliennes auto construites, lilian dot chardon at orange.fr 06 14 16 79 23
13 1 Olivier FONTES
* http://infracom-france.com/blog2/?p=9690
14 32 Julien Aubé
* Poste d'alim autonome "tout prêt": http://landashop.com/catalog/advanced_search_result.php?keywords=solar&osCsid=t05of5248n5f8bmgptksub3d10&x=0&y=0
15 33 Laurent GUERBY
* http://technoblogtroisieme.unblog.fr/
16 33 Laurent GUERBY
* http://technoblogtroisieme.unblog.fr/2012/05/18/recharger-son-portable-a-lessence/
17 14 Laurent GUERBY
18 21 Laurent GUERBY
Mats
19 22 Laurent GUERBY
* CTA : http://www.cta-pylones.com/
20 21 Laurent GUERBY
* Leclerc : http://www.antennes-leclerc.fr/
21 23 Laurent GUERBY
* mat alu telescopique http://www.batima-electronic.com/spip.php?article160
22 23 Laurent GUERBY
* eolien http://www.ase-energy.com/mat-haubane-universel-7m-pour-eolienne,fr,4,MAT7M.cfm
23 23 Laurent GUERBY
* eolien http://www.aurore-energies.com/eolienne/mat_universel_de_6_metres_a_4_haubans/mat_6m_pour_petite_eolienne_mat_haubane.html
24 14 Laurent GUERBY
25 26 Laurent GUERBY
Systemes
26 1 Olivier FONTES
* http://www.energiemobile.com/modulosite2/energie-mobile.htm
27 34 Laurent GUERBY
* 12W amorphe + batterie 12V 5Ah + chargeur 249.90 http://www.conrad.fr/kit_panneau_solaire_12_w_p_50682_50748_854189_563341_FAS
28 34 Laurent GUERBY
* 24W amorphe + batterie 12V 15Ah + chargeur 339.95 http://www.conrad.fr/kit_panneau_solaire_24_w_p_50682_50742_853686_715796_FAS
29 35 Laurent GUERBY
* Arduino MPPT http://www.timnolan.com/index.php?page=arduino-ppt-solar-charger
30 35 Laurent GUERBY
** http://en.wikipedia.org/wiki/Maximum_power_point_tracker
31 35 Laurent GUERBY
* Kermeur
32 35 Laurent GUERBY
** http://blog.lekermeur.net/?page_id=252
33 35 Laurent GUERBY
** http://www.lekermeur.net/lndkavr/
34 35 Laurent GUERBY
** http://blog.lekermeur.net/?p=1271
35 35 Laurent GUERBY
** http://blog.lekermeur.net/?page_id=287
36 35 Laurent GUERBY
 RB433, 2 minipci R52 ~ 15V 250 mA = 3.75W Ca fait 90 Wh par jour soit 15 euros et 2.7 kg par jour d'autonomie sur une batterie plomb, il faut encore multiplier par 2 ou 3 pour eviter de decharger trop.
37 35 Laurent GUERBY
* Le test par Olivier
38 35 Laurent GUERBY
** [[Test_du_kit_Photovoltaique_Ekko_12W_pour_alimenter_un_WRT_autonome]]
39 26 Laurent GUERBY
40 13 Laurent GUERBY
Panneaux solaires
41 8 Laurent GUERBY
* http://www.motto-engineering.eu/en/products/solar/schott-solar/
42 7 Laurent GUERBY
* http://www.mercateo.com/q?query=solarmarkt&catcat=live~showGrossColumn*
43 6 Laurent GUERBY
* http://www.ebay.de/itm/Schott-Solar-ASI-103-Photovoltaik-Solar-Solarmodul-/220871992555?pt=Solaranlagen&hash=item336cff24eb#ht_1312wt_1141
44 2 Julien Aubé
* http://www.simple-et-solaire.com/panneau-solaire/panneau-solaire-12v/panneau-solaire-amorphe-95wc.html
45 1 Olivier FONTES
* http://www.birdenergy.fr/shop/catalog/index.php?cPath=26 (Régulateurs multi-entrée Solaire/Eolien/hydro)
46 1 Olivier FONTES
* http://www.energiemobile.com/modulosite2/catalogue-produits.htm
47 27 Laurent GUERBY
* http://www.vaa-solarhandel.de/wp-content/uploads/2011/04/08.11.2011-Module-WR-Kombi-BHKW-Sonstiges-Grundst%C3%BCck-Solarkabel-Gesuche.pdf
48 27 Laurent GUERBY
* http://www.evotrend.de/sonderangebote.html
49 13 Laurent GUERBY
50 19 Laurent GUERBY
Photovoltaique amorphe
51 19 Laurent GUERBY
* http://www.terra-eco.com/-Panneaux-solaires-photovoltaiques-
52 19 Laurent GUERBY
* http://www.equipsolar.fr/equipsolar.php?rb=2&pg=0
53 19 Laurent GUERBY
* http://ecatalog.tritec.info/index.php/language/fr/cat/c135_Schott-Solar-ASI-Thin-Film.html
54 19 Laurent GUERBY
* http://www.globosolar.fr/materiel-photovoltaique/panneaux-photovoltaiques/schott-solar.html
55 19 Laurent GUERBY
* http://www.tritec-energy.com/en/solar-modules/schott-asi-series-the-next-generation-c-135/
56 19 Laurent GUERBY
* http://www.surtec.fr/catalog/panneau-solaire-amorphe-cPath84.html
57 19 Laurent GUERBY
* http://www.elysun.fr/module-photovoltaique-amorphe-schott-asi-100w.html
58 19 Laurent GUERBY
* http://pvinsights.com/
59 19 Laurent GUERBY
* http://www.sunelec.com/suntech-solar-panel-220-watts-3420-vmp-p-1363.html
60 19 Laurent GUERBY
61 13 Laurent GUERBY
Batteries
62 13 Laurent GUERBY
* http://www.energiedouce.com/batterie-au-gel-a-decharge-profonde-12v-110ah-victron-energy.html
63 13 Laurent GUERBY
* http://www.installer-panneau-materiel-solaire.com/batteries/?mod=ecommerce&prid=&rid=4&type=pro&marque=&prix=&autre=&page=0
64 5 Laurent GUERBY
* http://www.maurelma.ch/shop/index.php?cat=WG101&product=740089
65 20 Laurent GUERBY
* http://shop.ebay.fr/mtk-handel/m.html?_nkw=&_armrs=1&_from=&_ipg=&_trksid=p3686
66 28 Laurent GUERBY
* http://www.all-batteries.fr/
67 3 Laurent GUERBY
68 24 Laurent GUERBY
Piles a combustible
69 24 Laurent GUERBY
70 24 Laurent GUERBY
Piles au methanol pour les caravanes avec un modele en vente (ebay & boutiques meme sur Toulouse) autour de 2000 euros pour 25W (12V * 2A) de capacité, petite boite  43,5 x 20,0 x 27,6 cm / 6.5 kg et 0.9 litre de methanol par kWh produit. A 10W cela fait 45 jours d'autonomie pour 40 euros la recharge de 10 litres.
71 24 Laurent GUERBY
72 24 Laurent GUERBY
* http://energieplanete.secondes.info/prix-des-piles-a-combustible-efoy/
73 24 Laurent GUERBY
* http://www.efoy.com/fr/piles-a-combustible-produits.html
74 24 Laurent GUERBY
* http://www.le-camping-car.com/forum/electricite-energie-autonomie-f71/pile-combustible-efoy-t50.html
75 24 Laurent GUERBY
* http://www.ebay.de/sch/i.html?_from=R40&_trksid=p5197.m570.l1313&_nkw=efoy&_sacat=See-All-Categories
76 25 Laurent GUERBY
* http://www.efoy-comfort.com/fr/donn%C3%A9es-techniques-0
77 24 Laurent GUERBY
78 24 Laurent GUERBY
79 11 Laurent GUERBY
Eolien
80 11 Laurent GUERBY
* http://www.aerial.net/shop/index.php?cPath=104
81 11 Laurent GUERBY
* http://www.aerial.net/shop/product/1101/macrowind-400w-12v-6-blades.html
82 12 Laurent GUERBY
* Test de petites eoliennes http://www.bettergeneration.com/green-energy-reviews.html
83 17 Laurent GUERBY
* En haute garonne installateur vendeur : http://www.krugwind.com/
84 17 Laurent GUERBY
* Test SEPEN http://www.sepen-montplaisir.fr/
85 17 Laurent GUERBY
* http://fr.wikipedia.org/wiki/Petit_%C3%A9olien
86 11 Laurent GUERBY
87 3 Laurent GUERBY
Forums
88 3 Laurent GUERBY
* http://forum-photovoltaique.fr/viewtopic.php?f=40&t=22015
89 29 Laurent GUERBY
* http://forum.mikrotik.com/viewtopic.php?f=7&t=57601
90 29 Laurent GUERBY
* http://forum.mikrotik.com/viewtopic.php?f=3&t=45990&p=259224&hilit=fuel+cell#p237245
91 29 Laurent GUERBY
92 9 Laurent GUERBY
93 9 Laurent GUERBY
Doc
94 9 Laurent GUERBY
* http://www.posharp.com/photovoltaic/panelefficiency/database.aspx
95 36 Laurent GUERBY
* http://www.freeenergyeurope.com/htm/FEE_solar_panel_test_results.htm
96 9 Laurent GUERBY
97 18 Laurent GUERBY
Solutions radio
98 9 Laurent GUERBY
* http://jeelabs.com/products/jeenode
99 9 Laurent GUERBY
100 36 Laurent GUERBY
101 15 Laurent GUERBY
> Cell Type: The type of silicon that comprises a specific cell, based on the cell manufacturing process. Each cell type has pros and cons. Monocrystalline PV cells are the most expensive and energy intensive to produce but usually yield the highest efficiencies. Though polycrystalline and ribbon silicon cells are slightly less energy intensive and less expensive to produce, these cells are slightly less efficient than monocrystalline cells. However, because both poly- and ribbon silicon panels leave fewer gaps on the panel surface (due to square or rectangular cell shapes), these panels can often offer about the same power density as monocrystalline modules. Thin-film panels, such as those made from amorphous silicon cells, are the least expensive to produce and require the least amount of energy and raw materials, but are the least efficient of the cell types. They require about twice as much space to produce the same power as mono-, poly-, or ribbon-silicon panels. Thin-film panels do have better shade tolerance and high-temperature performance but are often more expensive to install because of their lower power density.
102 15 Laurent GUERBY
> Sanyo’s "bifacial" HIT panels are composed of a monocrystalline cell and a thin layer of amorphous silicon material. In addition to generating power from the direct rays of the sun on the panel face, this hybrid panel can produce power from reflected light on its underside, increasing overall panel efficiency.
103 15 Laurent GUERBY
> Cells in Series: Number of individual PV cells wired in series, which determines the panel design voltage. Crystalline PV cells operate at about 0.5V. When cells are wired in series, the voltage of each cell is additive. For example, a panel that has 36 cells in series has a maximum power voltage (Vmp) of about 18V. Why 36? Historically, panels known as 12V were designed to push power into 12V batteries. But to deliver the 12V, they needed to have enough excess voltage (electrical pressure) to compensate for the voltage loss due to high temperature conditions. Panels with 36 ("12V") or 72 ("24V") cells are designed for battery-charging applications. 
104 1 Olivier FONTES
> Panels with other numbers of cells in series are intended for use in grid-tied systems. Due to the increased availability of step-down/MPPT battery charge controllers, grid-tied panel
105 1 Olivier FONTES
106 36 Laurent GUERBY
Données
107 36 Laurent GUERBY
* panneaux PV EUR/W m2/W
108 36 Laurent GUERBY
** poly
109 36 Laurent GUERBY
** mono 1.2 m2 pour 175W 145W/m2
110 36 Laurent GUERBY
** amorphe 1.3 m2 pour 90W 70W/m2
111 36 Laurent GUERBY
* batterie Wh/kg EUR/Wh
112 36 Laurent GUERBY
** plomb acide
113 36 Laurent GUERBY
*** 22 EUR 12V12Ah = 144Wh 0.15 EUR/Wh 36 Wh/kg Caractéristiques : Dimensions 151x98x97.5mm . Poids 4Kg   http://www.priceminister.com/offer?action=desc&aid=280092061
114 36 Laurent GUERBY
*** 40 EUR 12V18Ah = 216 Wh 0.18 EUR/Wh 37 Wh/kg Caractéristiques : Dimension 181x77x167mm . poids 5,70Kg http://www.priceminister.com/offer?action=desc&aid=114187437
115 36 Laurent GUERBY
*** 175 EUR 12V100Ah = 1200 Wh 0.15 EUR/Wh 38 Wh/kg Caractéristiques : Dimensions: 328x175x216mm. Poids: 31Kg 
116 36 Laurent GUERBY
*** 250 EUR 12 volts 111 Ah = 1332 Wh. 0.19 EUR/Wh 40 Wh/kg  (C20) - D: 330x173x220 mm. 33.1 Kg  http://www.priceminister.com/offer?action=desc&aid=494856956
117 36 Laurent GUERBY
*** 5-8 EUR/kg
118 36 Laurent GUERBY
** LiFePO4
119 36 Laurent GUERBY
*** 545 USD = 440 EUR 24V30Ah = 720 Wh 0.61 EUR/Wh 96 Wh/kg 7.50 kg Small Size: 300x105x150 mm http://www.pingbattery.com/servlet/the-V2.5-LiFePO4-Battery-Packs/Categories
120 15 Laurent GUERBY
121 35 Laurent GUERBY
Il faudra sans doute 50 a 100W de panneau photovoltaique pour un relai, on trouve du 90W amorphe pour 121 euros livrés :
122 15 Laurent GUERBY
123 15 Laurent GUERBY
http://www.ebay.de/itm/Schott-Solar-ASI-90-Dunnschicht-Solarmodul-/250927063886?pt=Solaranlagen&hash=item3a6c6b234e#ht_500wt_1413
124 1 Olivier FONTES
125 35 Laurent GUERBY
20kg de batterie (100 euros) + panneau (121 euros) + regulateur (50 ?) + matos wifi et antennes (300 ?) ~ 600 euros.
126 15 Laurent GUERBY
127 15 Laurent GUERBY
http://www.interprojekt.com.pl/mikrotik-routerboard-level-64mb-3xlan-3xminipci-p-394.html
128 15 Laurent GUERBY
http://www.interprojekt.com.pl/mikrotik-routerboard-r52nm-minipci-p-898.html
129 15 Laurent GUERBY
http://www.interprojekt.com.pl/mikrotik-routerboard-r52hn-300mbps-80211abgn-high-p-745.html
130 15 Laurent GUERBY
MIMO et dual 2.4/5.5
131 16 Laurent GUERBY
132 16 Laurent GUERBY
Une solution alternative :
133 16 Laurent GUERBY
134 16 Laurent GUERBY
- un routerboard a la place du switch
135 16 Laurent GUERBY
- un cable pieuvre power jack 1 femelle vers 8 males
136 16 Laurent GUERBY
- une alimentation de portable 19V 3.42A
137 16 Laurent GUERBY
- un splitter PoE passif
138 16 Laurent GUERBY
- des injecteurs PoE passif
139 16 Laurent GUERBY
140 16 Laurent GUERBY
http://shop.varia-store.com/product_info.php?info=p1052_MikroTik-RouterBOARD-750--RB750--RB-750--Level-4-300-MHz.html
141 16 Laurent GUERBY
http://cgi.ebay.com/DC-1-8-Power-Cable-CCTV-Camera-DVR-Save-Adapter-/320442726434?pt=LH_DefaultDomain_0&hash=item4a9bdff822
142 16 Laurent GUERBY
http://cgi.ebay.com/PoE-Power-Over-Ethernet-Injector-Splitter-Adpater-Kit-/120719762126?pt=LH_DefaultDomain_0&hash=item1c1b7562ce
143 16 Laurent GUERBY
http://cgi.ebay.com/Acer-Notebook-AC-Adapter-Charger-19V-3-42A-5-5mm-2-1mm-/270686346419?pt=Laptop_Adapters_Chargers&hash=item3f0629dcb3
144 16 Laurent GUERBY
145 35 Laurent GUERBY
L'avantage du routerboard est qu'il accepte 9 a 28V DC en alimentation donc a peu pres comme les ubiquity et que ses temperatures de fonctionnement sont tres larges de -40 a +55C.
146 35 Laurent GUERBY
La doc du routerboard n'est pas tres claire sur la taille du power jack est-ce 5.5/2.0 ou le plus standard 5.5/2.1 ?